Solar Film

Solar Film Data Sheets

Interior Mirror / Alu 70 C

Alu 70 films are highly effective at reducing solar heat gain, whilst at the same time continuing to allow most natural light to pass through. Solar glare is greatly diminished and its one-way mirror aspect guarantees privacy from prying eyes, whilst affording a modern feel to the exterior of a building.
Warranty 7YEARS
Fire-resistance rating M1
Storage from -5°C to +40°C 3 YEARS
REACH RoHS compliant Respected

Widths available:

122 cm
152 cm
183 cm

Data calculated based on film applied to clear glass 3 mm thick (*on double glazing 4-16-4)

Ultraviolet transmission 1 %
Visible light transmission 35 %
Reflection of external visible light 41 %
Reflection of internal visible light 41 %
Total solar energy rejected 67 %
Total solar energy rejected 2* 61 %
Solar ratio :
    Solar energy reflection 41 %
    Solar energy absorption 36 %
    Solar energy transmission 23 %
Reduction in Solar Glare 64 %
g-value 0.38
u-value 0.33
Heat loss Reduction (Winter)
Rejected Infrared (760-2500 nm)
Shading coefficient 0.43
Installation type Internal application
Roll length 30,5 m
PET / PVC composition PET
Thickness 40 μ
Colour : SILVER
Installation advice

Vertical installation and on standard glass surface**

Clear single pane solarscreen Clear single pane
Tinted single pane solarscreen Tinted single pane
Reflective tinted single pane solarscreen Reflective tinted single pane
Clear double pane solarscreen
Tinted double pane solarscreen Tinted double pane
Reflective tinted double pane solarscreen Reflective tinted double pane
Gas-filled double pane - Low E solarscreen Gas-filled double pane - Low E
STADIP EXT. clear double pane solarscreen STADIP EXT. clear double pane
STADIP INT. clear double pane solarscreen STADIP INT. clear double pane
solarscreen Yes    solarscreen Caution    solarscreen Not recommended   

*Recommendations provided on the basis of a glazed surface covering up to 2.5m², contact us for definitive details or to obtain a thermal chock analysis report.


1. "Hard" scratch resistant layer, for durability and ease of maintenance during window cleaning

2. High optical quality polyester, with anti IR metal particles deposit

3. Bonding adhesive

4. High optical quality polyester

5. PS adhesive, glass polymerization within 15 days

6. Protection release liner, disposable after installation

Maintenance instructions

Soapy water solution (ref. sun pose 0808 or 0805 Film on), do not clean for at least a month and do not apply any type of sticker or adhesive on the film.

Non-contractual data. We reserve the right to modify the composition of our films at any time. Consult our warranty documents.

Free quotation

Send your request