Advanced
Advanced
Advanced Office Upgrade / Projection film
Thanks to this film carefully applied to your glazing, you can project any movies and/or image types for a perfect result.
1. 25μ frosted polyester with satin surface
2. Bonding adhesive
3. Polyester 100μ
4. Reinforced PS Adhesive to accompany the elasticity of the film in case of impact, glass polymerization within 30 days
5. Protection release liner, disposable after installation
Soapy water solution (ref. 600-F0355 Film on), do not clean for at least a month and do not apply any type of sticker or adhesive on the film.
Data calculated based on film applied to clear glass 3 mm thick (*on double glazing 4-16-4)
| Ultraviolet transmission | 5 % |
| Visible light transmission | 71 % |
| Reflection of external visible light | 26 % |
| Reflection of internal visible light | 26 % |
| Total solar energy rejected | 28 % |
| Total solar energy rejected 2* | 27 % |
| Solar ratio : | |
| Solar energy reflection | 23 % |
| Solar energy absorption | 6 % |
| Solar energy transmission | 71 % |
| Reduction in Solar Glare | 22 % |
| g-value | 0.71 |
| u-value | 5.6 |
| Heat loss Reduction (Winter) | |
| Rejected Infrared (760-2500 nm) | |
| Shading coefficient | 0.8 |
| Installation type : Interior | |
| Roll length | 30.5 m |
| Film composition | PET |
| Thickness | 150 μ |
| Colour from the outside : WHITE | |
Vertical installation and on standard glass surface*
| Clear single pane |  |
| Tinted single pane | |
| Reflective tinted single pane | |
| Clear double pane | |
| Tinted double pane | |
| Reflective tinted double pane | |
| Gas-filled double pane - Low E | |
| STADIP EXT. clear double pane | |
| STADIP INT. clear double pane | |
 Yes
 Caution
 Not recommended
|
|
*Recommendations provided on the basis of a glazed surface covering up to 2.5m².
Non-contractual data. We reserve the right to modify the composition of our films at any time. Consult our warranty documents.