Welcome to Solar Gard Ireland

Advanced

Advanced

Advanced Protection / CU 20 dB36 - Anti-high frequency

The CU 20 dB36 - Anti-high frequency film considerably reduces solar heat while retaining some of the natural light. It allows a good reduction of glare and brings to the building a colored and personalized touch. Finally, thanks to its pure copper alloy, it effectively protects high frequencies and attenuates up to almost 37 dB.

Warranty See the notice
Storage from -5°C to +40°C 3 YEARS
REACH RoHS compliant Respected
EN 61000-5-7Respected
ASTM D4935-18 Respected
Widths available:
152 cm
Construction

1. Hard scratch resistant layer, for durability and ease of maintenance during window cleaning

2. High optical quality polyester, with anti IR metal particles deposit

3. Bonding adhesive

4. High optical quality polyester

5. PS adhesive, glass polymerization within 15 days

6. Protection release liner, disposable after installation

Maintenance instructions

Soapy water solution (ref. 600-F0355 Film on), do not clean for at least a month and do not apply any type of sticker or adhesive on the film. To prevent a possible oxidation of the metal alloys, it is mandatory to use our sealing varnish (reference number 0771) on the corners of the film, after installation.

TECHNICAL DATASHEET

Data calculated based on film applied to clear glass 3 mm thick (*on double glazing 4-16-4)

Ultraviolet transmission 1 %
Visible light transmission 21 %
Reflection of external visible light 37 %
Reflection of internal visible light 37 %
Total solar energy rejected 80 %
Total solar energy rejected 2* 86 %
Solar ratio :
    Solar energy reflection 47 %
    Solar energy absorption 39 %
    Solar energy transmission 14 %
Reduction in Solar Glare 80 %
g-value 0.27
u-value -
Heat loss Reduction (Winter)
Rejected Infrared (760-2500 nm)
Shading coefficient 0.2
Installation type : Exterior
Roll length 30,5 m
Film composition PET
Thickness 110 μ
Colour from the outside : COPPER
Installation advice

Vertical installation and on standard glass surface*

Clear single pane solarscreen Clear single pane
Tinted single pane solarscreen Tinted single pane
Reflective tinted single pane solarscreen Reflective tinted single pane
Clear double pane solarscreen
Tinted double pane solarscreen Tinted double pane
Reflective tinted double pane solarscreen Reflective tinted double pane
Gas-filled double pane - Low E solarscreen Gas-filled double pane - Low E
STADIP EXT. clear double pane solarscreen STADIP EXT. clear double pane
STADIP INT. clear double pane solarscreen STADIP INT. clear double pane
solarscreen Yes    solarscreen Caution    solarscreen Not recommended   

*Recommendations provided on the basis of a glazed surface covering up to 2.5m², contact us for definitive details or to obtain a thermal chock analysis report.

Non-contractual data. We reserve the right to modify the composition of our films at any time. Consult our warranty documents.

Free quotation

Send your request