ARCHIPRO

Solar Film

Solar Film Data Sheets

Polycarbonate / Metalux Plus

The Metalux plus self-adhesive reflective film has been specially designed to protect against the detrimental effects of solar exposure, limiting solar heat gain, solar glare and eliminating the effects of fading on polycarbonate and other synthetic materials.
Warranty 5YEARS
Storage from -5°C to +40°C 3 YEARS
European Standard EN 1096-1 Tested in a laboratory
REACH RoHS compliant Respected

Widths available:

152 cm
TECHNICAL DATASHEET

Data calculated based on film applied to clear glass 3 mm thick (*on double glazing 4-16-4)

Ultraviolet transmission 30 %
Visible light transmission 10 %
Reflection of external visible light 25 %
Reflection of internal visible light 25 %
Total solar energy rejected 84 %
Total solar energy rejected 2* 80 %
Solar ratio :
    Solar energy reflection 42 %
    Solar energy absorption 44 %
    Solar energy transmission 14 %
Reduction in Solar Glare 88 %
g-value 0.22
u-value NC
Heat loss Reduction (Winter)
Rejected Infrared (760-2500 nm)
Shading coefficient 0.2
Installation type : Internal application
Roll length 50 m
PET / PVC composition PVC
Thickness 80 μ
Colour : GREY
Installation advice

Vertical installation and on standard glass surface**

Clear single pane solarscreen Clear single pane
Tinted single pane solarscreen Tinted single pane
Reflective tinted single pane solarscreen Reflective tinted single pane
Clear double pane solarscreen
Tinted double pane solarscreen Tinted double pane
Reflective tinted double pane solarscreen Reflective tinted double pane
Gas-filled double pane - Low E solarscreen Gas-filled double pane - Low E
STADIP EXT. clear double pane solarscreen STADIP EXT. clear double pane
STADIP INT. clear double pane solarscreen STADIP INT. clear double pane
solarscreen Yes    solarscreen Caution    solarscreen Not recommended   

*Recommendations provided on the basis of a glazed surface covering up to 2.5m², contact us for definitive details or to obtain a thermal chock analysis report.

Construction
solarscreen

1. PVC with anti IR metal particles

2. Half Permanent Adhesive, allowing the "degassing" of the actual surface, and limits the adhesive transfer during removal

3. Protection release liner, disposable after installation

Maintenance instructions

Soapy water solution (ref. 0805 Film on), do not clean for at least a month and do not apply any type of sticker or adhesive on the film.

Non-contractual data. We reserve the right to modify the composition of our films at any time. Consult our warranty documents.

Free quotation

Send your request